Motion Amplification

Motion Amplification Systems for Predictive Maintenance

Video Motion Amplification:

Good Vibrations uses RDI Technologies IRIS M Motion Amplification system to capture two-dimensional video images that can be used to measure noncontact vibration frequencies and amplitudes on locations that would have been inaccessible just a few years ago.

These amplified videos can show movement not detectable with the naked eye. This would help to determine the root cause of your vibration or product quality problems. If a picture tells a thousand words, these videos will write a book.

Infrared Thermography:

This technology is based on the principle that all operating equipment creates heat due to the energy being used.

A thermal imager allows you to “see the heat”. Unlike an infrared thermometer that only captures temperature at a single point, a thermal imager can capture temperatures over a wide area. The captured thermal image shows a temperature profile as a two-dimensional picture. This allows the technician to review the entire unit’s surface heat and diagnose it as either normal or abnormal. Thermal imagers can also store previous and current images for comparison. Typically, a digital visual image is also captured and then all images are uploaded to a central database for reporting purposes.

infared2

Thermal applications

  • Finding faulty terminations in high-power electrical circuits
  • Locating overloaded circuit breakers in a power panel
  • Identifying fuses at or near their current rated capacity
  • Identifying problems in electrical switchgear
  • Monitoring bearing temperatures in large motors or other rotating equipment
  • Identifying “hot spots” in electronic equipment
  • Finding high-temperature exposure areas
  • Building insulation voids
  • Faulty steam traps and leaks
  • Roof leaks
infared

Infrared thermal images can be collected route-based, where an image is collected on a specific number of points at a certain time-based interval.

Maintenance Tip: Unpainted metals are difficult to measure temperature on. To improve measurement accuracy and repeatability, consider painting dark spots on such components.